WANFleX MINT TDMA Firmware (Beta Version) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATTENTION! Please report any bugs or issues to support@infinetwireless.com 18.07.22 v0.9.10 ~~~~~~~~~~~~~~~~~~ Features: - Misoctl functionality which allows the unit to transmit data in MISO mode on lowest MCS even if MIMO mode is configured - added Bugfixes: - Incorrect chain mask control functionality in 20 MHz channel width - fixed - Incorrect Web GUI operation in rare cases - fixed - Increased the radio link performance by reducing guard intervals - Improved Power Control (pwrctl) functionality - Improved the radio link stability Known issues: - 'Greenfield' and 'scrambling' features are not supported in the R5000 compatibility mode 24.05.22 v0.9.9 ~~~~~~~~~~~~~~~~~~~ Features: - The ability to manage RX / TX channels in MISO mode (chainmask control) - added Bugfixes: - Incorrect pwrctl/ATPC operation - fixed - The problem with prf links on Ex-BSx models - fixed - Better robustness of the DFS algorithm in radar detection mode - Incorrect frequency limits on E6-BS and E6-ST units - resolved - Improved distance estimation - Improved stability Known issues: - In some rare cases the unit may be re-started - 'Greenfield', 'scrambling' and 'misoctl' features are not supported in the R5000 compatibility mode 15.02.22 v0.9.8 ~~~~~~~~~~~~~~~~~~~ Bugfixes: - Fixed an issue where the radio link might not work with certain configurations Known issues: - Occasional incorrect distance estimation - Rare unexpected device restarts - 'Greenfield', 'scrambling' and 'misoctl' features are unsupported in the R5000 compatibility mode 08.02.22 v0.9.7 ~~~~~~~~~~~~~~~~~~~ Features: - AUX-ODU-SYNC management option added to the web interface Bugfixes: - Fixed problem with master device reloading in PtP mode - Improved accuracy of the spectrum analyzer (correction factors introduced) Known issues: - Occasional incorrect distance estimation - Rare unexpected device restarts - 'Greenfield', 'scrambling' and 'misoctl' features are unsupported in the R5000 compatibility mode 17.12.21 v0.9.6 ~~~~~~~~~~~~~~~~~~~ Features: - Regulatory Domain can be configured via Web GUI or CLI - Additional radio statistics (MCS, lost packets, SNR, EVM, etc.) now available via Web GUI Bugfixes: - Improved stability in PtMP scenario - Web GUI bugfixes - Unit could operate outside of the regulatory domain bounds - Fixed - LLDP protocol fixes for Ex-STx models Known issues: - Occasional incorrect distance estimation - Rare unexpected device restarts '- Greenfield', 'scrambling' and 'misoctl' features are unsupported in the R5000 compatibility mode Warnings: - Operating frequency channel might change as a result of the update if the unit operated outside of the regulatory domain bounds prior to the upgrade. - Air protocol has been updated, so the new version is not compatible with the previous. Please upgrade all the units, starting from the remote ones. 11.11.21 v0.9.5 ~~~~~~~~~~~~~~~~~~~ Bugfixes: - Fixed a number of issues that could lead to a device restart - Fixed an issue that could lead to persistent packet retransmissions with certain combinations of the radio frame parameters - Fixed a number of web GUI issues Known issues: - Occasional incorrect distance estimation - Rare unexpected device restarts - 'Wrong version' is shown in the RF link status table for R5000 units - 'Greenfield', 'scrambling' and 'MISO' features are unsupported in the R5000 compatibility mode 09.09.21 v0.9.4 ~~~~~~~~~~~~~~~~~~~ Features: - Added QoS statistics to 'rf stat full' command output. Corrections: - Resolved the problem with occasional brief link disconnection. - Resolved the problem of radio connection disconnection, that caused losing of access to the remote device. - Fixed an issue where the firmware update attempt via "Check Latest Beta" function resulted in device going to reboot. - Fixed problem with modulation dropping under heavy traffic load. - Fixed the problem of retries with certain combinations of Band, Rate, Win and DLP. - Fixed abnormal EVM fluctuation. - Fixed several bugs in web interface: - Fixed for most cases the problem with erroneous resetting settings to the default value. - Fixed disabling ATPC. Known Issues and Limitations: - Sometimes link distance may be calculated incorrectly. This should not affect the link peformance. - There are a number of bugs in the web interface which will be fixed in the next version. - In rare cases, the device may reboot with Panic error in the log. - The spectrum analyzer may cause the device to reboot. - Wrong version is displayed in "mint map" command output when working with R5000. - When the R5000 and Evolution are operating in transient mode, the greenfield, scrambling and misoctl modes should be disabled on the R5000. 29.06.21 v0.9.3 ~~~~~~~~~~~~~~~~~~~ Features: - Added option R5000 Compatibility (Transient) for type Slave. - Added DFS command to display current state (dfs rf6.0 state). Correction: - Fixed an issue that resulted in an increase in retries when the frame size is more than 4ms. - System optimization, bug fixes. 12.05.2021 v0.9.2 ~~~~~~~~~~~~~~~~~~~ Initial firmware release for Evolution family Features: - BS Sector capacity up to 800 Mbps at 80 MHz channel width. Sector packet rate up to 540 000 PPS - BS Sector can act as a sector for the previous generation subscriber terminals (R5000 family) Known issues and limitations: - 5 and 10 MHz channel widths are unavailable - Evolution Subscriber Terminal is not yet compatible with the previous generation base stations (R5000 family)