The mib module, containing Octopus radio parameters.
Radio-channel bandwidth in kHz.
Syntax: Integer32
Channel frame length in microseconds
Syntax: Integer32
This value indicates device type
Syntax: INTEGER { ptp(0), ptmp(1) }
This value indicates device role
Syntax: INTEGER { bsu(0), su(1) }
Temperature of radio module chip in degrees Celsius
Syntax: Integer32
Flag to enable auto setting of allowed downlink traffic portion related to all traffic
Syntax: INTEGER { off(0), on(1)}
Estimated portion of allowed downlink traffic related to all traffic in percents
Syntax: Integer32
A table of radio links by link index
Syntax: SEQUENCE OF OctLinksEntry
Each entry contains link-specific data by link index
Syntax: OctLinksEntry
Peer device serial number
Syntax: Integer32
State of radio-modem
Syntax: INTEGER { init(0), configuring(1), config-set(2), enabling(3), started(4), disconnecting(5), wait-radar(6), cac(7), spectrum-scan(8), sector-detection(9), stopping-detection(10), connecting(11), connected(12), standby(13), undefined(14)}
Peer device name
Syntax: DisplayString
Peer device management IP address
Syntax: IpAddress
Estimated length of radio Link in meters
Syntax: Integer32
Index of particular radio port, used for connection with peer.
Syntax: Integer32
A table of radio channels by channel index and link index
Syntax: SEQUENCE OF OctChannelsEntry
Each entry contains channel-specific data by channel index and link index
Syntax: OctChannelsEntry
Radio Link index. The link identified by a particular value of this index is the same link as identified by the same value of octPeerSerial.
Syntax: Integer32
Radio channel index for particular link, ranging from 1 to maximum number of radio channels in this single link.
Syntax: Integer32
Current downlink frequency in MHz
Syntax: Integer32
Current uplink frequency in MHz
Syntax: Integer32
Current downlink capacity in kbps
Syntax: Integer32
Current uplink capacity in kbps
Syntax: Integer32
Current downlink throughput in kbps
Syntax: Integer32
Current uplink throughput in kbps
Syntax: Integer32
A table of radio streams by stream index, channel index and link index
Syntax: SEQUENCE OF OctStreamsEntry
Each entry contains stream-specific data by stream index, channel index and link index
Syntax: OctStreamsEntry
Radio Link index, ranging from 1 to maximum link number used. The link identified by a particular value of this index is the same link as identified by the same value of octPeerSerial.
Syntax: Integer32
Radio channel index for particular link, ranging from 1 to maximum number of radio channels in this single link. The channel identified by particular value of this index is the same channel as identified by the same value of octChannelIndex.
Syntax: Integer32
Radio stream index for particular channel, ranging from 1 to maximum number of radio streams in this single channel.
Syntax: Integer32
Transmitter power of the radio module in thousandths of dBm
Syntax: Integer32
Current modulation and coding scheme for downlink stream
Syntax: INTEGER { unknown(-2147483648), qpsk-1-4(0), qpsk-1-3(1), qpsk-1-2(2), qpsk-5-8(3), qpsk-3-4(4), qam16-1-2(5), qam16-5-8(6), qam16-3-4(7), qam64-2-3(8), qam64-3-4(9), qam64-5-6(10), qam256-3-4(11), qam256-13-16(12), qam256-7-8(13)}
Current modulation and coding scheme for uplink stream
Syntax: INTEGER { unknown(-2147483648), qpsk-1-4(0), qpsk-1-3(1), qpsk-1-2(2), qpsk-5-8(3), qpsk-3-4(4), qam16-1-2(5), qam16-5-8(6), qam16-3-4(7), qam64-2-3(8), qam64-3-4(9), qam64-5-6(10), qam256-3-4(11), qam256-13-16(12), qam256-7-8(13)}
Received signal strength indicator on a specific downlink stream, measured in thousandths of dBm
Syntax: Integer32
Received signal strength indicator on a specific uplink stream, measured in thousandths of dBm
Syntax: Integer32
Carrier to interference + noise ratio on a specific downlink stream, measured in thousandths of dB
Syntax: Integer32
Carrier to interference + noise ratio on a specific uplink stream, measured in thousandths of dB
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for downlink, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for uplink, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for downlink in the last 5 seconds, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for uplink in the last 5 seconds, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for downlink in the last 5 minutes, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for uplink in the last 5 minutes, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for downlink in the last hour, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmition, to the total number of transmitted transport-blocks for uplink in the last hour, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmitionto the total number of transmitted transport-blocks for downlink for the last day, measured in 1e-4
Syntax: Integer32
Ratio of the transmitted transport-blocks that required re-transmitionto the total number of transmitted transport-blocks for uplink for the last day, measured in 1e-4
Syntax: Integer32
Error vector magnitude on a specific downlink stream
Syntax: Integer32
Error vector magnitude on a specific uplink stream
Syntax: Integer32
Current crosstalk, influence of another downlink stream in thousandths of dB
Syntax: Integer32
Current crosstalk, influence of another uplink stream in thousandths of dB
Syntax: Integer32
Amount of transmitted radio frames on a specific downlink stream
Syntax: Counter64
Amount of transmitted radio frames on a specific uplink stream
Syntax: Counter64
Amount of lost radio frames on a specific downlink stream
Syntax: Counter64
Amount of lost radio frames on a specific uplink stream
Syntax: Counter64
Ratio of the lost transport-blocks to the total number of transmitted transport-blocks for downlink, measured in 1e-6
Syntax: Integer32
Ratio of the lost transport-blocks to the total number of transmitted transport-blocks for uplink, measured in 1e-6
Syntax: Integer32
The octRadio group of objects provided for observation Octopus radio parameters
Objects:
octChannelWidth, octFrameLength, octDeviceType, octDeviceRole, octTemperature, octAutoDlUlRatio, octDlUlRatio, octPeerSerial, octLinkState, octPeerName, octPeerAddress, octLinkDistance, octOwnPort, octChnLinkIndex, octChannelIndex, octDlFrequency, octUlFrequency, octDlCapacity, octUlCapacity, octDlThroughput, octUlThroughput, octStrLinkIndex, octStrChanIndex, octStreamIndex, octTxPower, octDlMcs, octUlMcs, octDlRssi, octUlRssi, octDlCinr, octUlCinr, octDlArqRatio, octUlArqRatio, octDlArqRatio5sec, octUlArqRatio5sec, octDlArqRatio5min, octUlArqRatio5min, octDlArqRatio1Hour, octUlArqRatio1Hour, octDlArqRatio1Day, octUlArqRatio1Day, octDlEvm, octUlEvm, octDlCrosstalk, octUlCrosstalk, octDlTxFrames, octUlTxFrames, octDlLostFrames, octUlLostFrames, octDlLostRatio, octUlLostRatio